Qualification Outline
22/07/2026 5:47 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Printing and Graphic Arts (Print Production Support)
Certificate II in Printing and Graphic Arts (Print Production Support)
ICP20410
W764
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 05/07/2010 | Current | Approved |
Description
Descriptor
This qualification applies to individuals who provide production support across a range of sectors in the printing and graphic arts industry. They will generally work under direct supervision and use limited practical skills and fundamental operational knowledge in a defined context.
Job Roles
Print offsider
Schedule
Packaging Rules
Total number of units = fifteen (15)Four (4) core units plus;
Six (6) elective units from Group A plus;
Five (5) elective units from Group B
Up to two (2) elective units from Group A can be substituted with Group B elective units listed below.
Two (2) elective units must be selected from Group B.
Up to three (3) Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this or any other endorsed Training Package or accredited course.
Elective units must be relevant to the qualification, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3258 | ICPSU262C | Communicate in the workplace | 50 | Unit of competency |
| D3247 | ICPSU216C | Inspect quality against required standards | 30 | Unit of competency |
| D3256 | ICPSU260C | Maintain a safe work environment | 30 | Unit of competency |
| D1021 | BSBSUS201A | Participate in environmentally sustainable work practices | 10 | Unit of competency |
2. Group A Elective Units
Six (6) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
Note: ICPSU201C OR ICPSU202C may be chosen, NOT both.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3270 | ICPSU357C | Apply quick changeover procedures | 20 | Unit of competency |
| D3244 | ICPSU208C | Operate and monitor machines (basic) | 30 | Unit of competency |
| D3259 | ICPSU263C | Perform basic industry calculations | 30 | Unit of competency |
| D3242 | ICPSU203C | Prepare and maintain the work area | 60 | Unit of competency |
| D3243 | ICPSU207C | Prepare machine for operation (basic) | 30 | Unit of competency |
| D3241 | ICPSU202C | Prepare, load and unload product on and off machine | 20 | Unit of competency |
| D3240 | ICPSU201C | Prepare, load and unload reels and cores on and off machine | 30 | Unit of competency |
| D3262 | ICPSU281C | Use computer systems | 30 | Unit of competency |
3. Group B Elective Units
Five (5) units must be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C825 | ICP20405 | Certificate II in Printing and Graphic Arts (Print Production Support) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWB3 | ICP20115 | Certificate II in Printing and Graphic Arts (General) | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships