Unit of competency Outline

Date retreived
23/07/2026 12:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use earthmoving and off-the-road tyre handlers

Use earthmoving and off-the-road tyre handlers

Unit of competency
National Code
AURKTJ016
State Code
OAK29
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/12/2018
View on TGA
State Implementation and Classification
Approved Date
15/03/2019
Field of Education
030503 - Vehicle Mechanics
Original Release Date
15/03/2019
Nominal Hours
20
Description
This unit describes the performance outcomes required to use an earthmoving and off-the-road (OTR) tyre handler. It includes checking the tyre handler and work site for suitability, operating the tyre handler, and completing work according to operational requirements.It applies to those who fit earthmoving and OTR tyres, wheels and rim assemblies of not less than 600 mm (24 inches) nominal diameter, noting that this may vary based on the occupation of the learner.Earthmoving and OTR tyre handlers must be operated in compliance with the licence requirements and regulations of the relevant state or territory authority. Licensing, legislative, regulatory, Australian standards or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Check tyre handler and work site for suitability
  • 1.1 Select work site for operations according to workplace procedures
  • 1.2 Check work area for obstructions and proximity to vehicles and equipment
  • 1.3 Erect barriers and warning signs in areas where there may be passing traffic
  • 1.4 Select specialist equipment and tools according to job requirements and workplace procedures
  • 1.5 Inspect tyre handler for serviceability and compliance with relevant Australian standards
2. Operate tyre handling equipment
  • 2.1 Conduct tyre handler pre-operational checks, and identify and address operating hazards
  • 2.2 Operate tyre handler, specialist equipment and tools within safe working limits to maximise efficiency of operations
  • 2.3 Handle tyres, wheels and rim assemblies according to workplace procedures, manufacturer handling recommendations, and Australian standards
3. Complete work processes
  • 3.1 Remove and store barriers and warning signs
  • 3.2 Return tyre handler, and specialist equipment and tools to appropriate storage or parking area
  • 3.3 Complete documentation according to workplace procedures and report any damage or faults
No information
No information
Replaces
State Code National Code Title Type
WI788 AURKTJ006 Use earthmoving and off-the-road tyre handlers Unit of competency