Unit of competency Outline
Date retreived
23/07/2026 3:39 AM AWST
23/07/2026 3:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out mechanical pre-repair operations
Carry out mechanical pre-repair operations
Unit of competency
National Code
AURTTA009
AURTTA009
State Code
AXB06
AXB06
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to prepare and clean mechanical components. It involves preparing for the task, cleaning and tagging equipment for repair or storage, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The pre-repair operations include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery or motorcycles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to undertake pre-repair operations
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Pre-repair procedures and information are sourced and interpreted
- 1.3 Cleaning options are analysed and selected
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Tools and equipment are selected and checked for serviceability
2. Clean and tag mechanical component prior to repair or storage
- 2.1 Component is cleaned according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to component or system
- 2.2 Cleaning materials and equipment are used according to manufacturer specifications and workplace procedures
- 2.3 Component is tagged and prepared for further repair procedures or treated with rust prevention material for storage
- 2.4 Used cleaning materials and waste materials are safely disposed of according to manufacturer specifications, workplace procedures, and safety and environmental requirements
3. Complete work processes
- 3.1 Final inspection is made to ensure work is to workplace expectations and component is presented ready for repair or storage
- 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 3.3 Tools and equipment are checked and stored according to workplace expectations
- 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF377 | AURTTA2009 | Carry out pre-repair operations (mechanical) | Unit of competency |