Unit of competency Outline

Date retreived
23/07/2026 4:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair vehicle body panels using metal finishing

Repair vehicle body panels using metal finishing

Unit of competency
National Code
AURVTN115
State Code
OCL86
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030511 - Panel Beating
Original Release Date
31/03/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to carry out metal finishing, incorporating heat shrinking, to repair vehicle body panels. This unit involves preparing for the task, selecting and using specialist tools and equipment, setting an oxyacetylene plant, panel beating and file finishing vehicle panels to pre-paint condition without using body fillers, and completing workplace processes and documentation.The unit applies to those working in the automotive body repair industry. It does not cover aluminium panels.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair vehicle body panel using metal finishing
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Access and interpret repair information from original equipment manufacturer (OEM) or authorised agency’s specifications
  • 1.3 Identify hazards associated with the work and manage risks
  • 1.4 Select and check materials, tools and equipment for serviceability
  • 1.5 Plan work to identify repair methods, minimise waste, and use time efficiently
2. Carry out metal finishing and heat shrinking activities
  • 2.1 Repair components using OEM or authorised agency’s required methods and equipment
  • 2.2 Remove dents using hammer and dolly techniques, and file finish panel surface to pre-paint condition
  • 2.3 Apply heat shrinking if panel surface is over stretched using an oxyacetylene plant
  • 2.4 Use dust and fume collection equipment during repair process according to safety and environmental requirements
  • 2.5 Seek and organise assistance where repair of components disturbs vehicle trim or electrical, mechanical or air conditioning systems
  • 2.6 Check repairs to ensure work is completed to workplace, OEM or authorised agency specifications and requirements
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWZ79 AURVTN015 Repair vehicle body panels using metal finishing Unit of competency
State Code National Code Title Type
BFY1 AUR32120 Certificate III in Automotive Body Repair Technology Qualification