Unit of competency Outline

Date retreived
22/07/2026 8:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install electronic locks and locking systems

Install electronic locks and locking systems

Unit of competency
National Code
CPPSEC2022
State Code
OBJ05
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
099905 - Security Services
Original Release Date
20/05/2020
Nominal Hours
10
Description
This unit specifies the skills and knowledge required to install a range of electronic locks and locking systems for door and window applications. It includes upgrading or strengthening hollow doors to increase security, and fitting door control devices and locks to windows, doors and jams.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.This unit may form part of the licensing requirements for people who sell, supply, advise on, install, maintain, monitor, repair or service security equipment and systems in those states and territories where these are regulated activities.
Notes
Elements and Performance Criteria
1 Prepare to install electronic lock and locking systems.
  • 1.1 Review work instructions to confirm installation timeframes, client needs, site location and equipment requirements, and clarify issues with relevant persons.
  • 1.2 Identify and obtain electronic lock and locking system to be installed following workplace procedures.
  • 1.3 Review and follow workplace policies and procedures including work health and safety (WHS) when carrying out work tasks.
2 Plan and organise installation operation.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required tools and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Select and organise required materials and hardware for product installation suitable to the specific installation surfaces and procedures.
  • 2.4 Inspect installation area to identify and control or report risks and hazards.
3 Conduct installation procedures.
  • 3.1 Use safe work practices when carrying out installation procedures according to WHS requirements.
  • 3.2 Fit locks to windows, doors and jams in accordance with manufacturers’ instructions.
  • 3.3 Fit door control devices to allow correct operation of doors in accordance with manufacturers’ instructions.
  • 3.4 Upgrade or strengthen hollow doors to increase security.
  • 3.5 Identify problems impacting the installation and obtain approval from relevant persons to vary the installation plan if required.
  • 3.6 Inspect installed electronic locks and locking and system to confirm correct operation and ensure no damage or distortion to the surrounding environment or services.
4 Complete installation and documentation.
  • 4.1 Notify installation completion to relevant persons.
  • 4.2 Complete installation documentation according to workplace requirements.
  • 4.3 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.4 Restore work area to original condition and remove waste caused by installation operation.
No information
No information
Replaces
State Code National Code Title Type
D1397 CPPSEC2022A Install mechanical lock and locking system Unit of competency