Qualification Outline
23/07/2026 5:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate I in Engineering
Certificate I in Engineering
MEM10198
M001
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 21/10/1998 | Current | Archived |
Description
Schedule
Pathways
1. CORE
**FOUNDATION ** To meet the requirements of the Training Package qualification, complete all Foundation units -listed as Core Requirements PLUS select 16 POINTS in units drawn from Core Band 1 OR Specialisation Band A electives listed below. Total qualification points to equal 16 points.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0202 | MEM1.2FA | Apply principles of Occupational Health & Safety in work environment | 1 | Unit of competency |
| M0203 | MEM1.3FA | Apply quality procedures | 1 | Unit of competency |
| M0204 | MEM1.4FA | Plan to undertake a routine task | 1 | Unit of competency |
| M0201 | MEM1.1FA | Undertake interactive workplace communication | 1 | Unit of competency |
2. ELECTIVES
**CORE BAND 1** Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0205 | MEM2.1C12A | Apply quality systems | 18 | Unit of competency |
| M0208 | MEM2.4C11A | Assist in the provision of on the job training | 18 | Unit of competency |
| M0209 | MEM2.5C11A | Measure with graduated devices | 18 | Unit of competency |
| M1348 | MEM2.3C11B | Operate in a work based team environment | 18 | Unit of competency |
| M0207 | MEM2.3C11A | Operate in a work based team environment | 18 | Unit of competency |
| M0206 | MEM2.2C11A | Organise and analyse information | 18 | Unit of competency |
| M0212 | MEM2.8C10A | Perform computations | 18 | Unit of competency |
| M0211 | MEM2.7C10A | Perform computations - basic | 18 | Unit of competency |
| M0213 | MEM2.9C10A | Perform computer operations | 18 | Unit of competency |
| M0210 | MEM2.6C10A | Plan a complete activity | 36 | Unit of competency |
3. ELECTIVE
**SPECIALISTION BAND A ASSEMBLY**
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0223 | MEM3.4AA | Electronic/electrical assembly (production) | 72 | Unit of competency |
| M0220 | MEM3.1AA | Manual production assembly | 36 | Unit of competency |
| M0221 | MEM3.2AA | Precision assembly | 36 | Unit of competency |
| M0224 | MEM3.5AA | Rework and repair (electrical/electronic production) | 72 | Unit of competency |
| M0225 | MEM3.6AA | Setting assembly stations | 18 | Unit of competency |
| M0226 | MEM3.7AA | Setting multistage continuous process lines | 54 | Unit of competency |
| M0222 | MEM3.3AA | Sheet and plate assembly | 36 | Unit of competency |
4. ELECTIVE
CASTING AND MOULDING * Units updated. NEW STUDENTS enrolling in or after 2004 must select B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0234 | MEM4.8AA | Fettle and trim metal castings/forgings | 36 | Unit of competency |
| M0244 | MEM4.18AA | General woodworking machine operations | 36 | Unit of competency |
| M0228 | MEM4.2AA | Gravity die casting | 18 | Unit of competency |
| W0817 | MEM4.9AB | Inspect/test castings/forgings | 54 | Unit of competency |
| M0235 | MEM4.9AA | Inspect/test castings/forgings | 54 | Unit of competency |
| M0227 | MEM4.1AA | Operate melting furnaces | 36 | Unit of competency |
| M0229 | MEM4.3AA | Operate pressure die casting machine | 36 | Unit of competency |
| M0232 | MEM4.6AA | Operate sand moulding and core making machines | 72 | Unit of competency |
| M0233 | MEM4.7AA | Pour molten metal | 36 | Unit of competency |
| M0230 | MEM4.4AA | Prepare and mix sand for metal moulding | 36 | Unit of competency |
| M0231 | MEM4.5AA | Produce moulds and cores by hand (jobbing) | 144 | Unit of competency |
| M0245 | MEM4.19AA | Refractory installation and repair | 36 | Unit of competency |
5. ELECTIVE
FABRICATION * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM5.21AA has been deleted from the competency standards November 2001. Enrolments should be in 5.4AB. MEM5.11AB, MEM5.14AB, MEM5.25BB, MEM5.49AB Added November 2003.
6. ELECTIVE
FORGING * Units updated. NEW STUDENTS enrolling in or after 2004 must select B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0823 | MEM6.3AB | Carry out heat treatment | 54 | Unit of competency |
| M0280 | MEM6.3AA | Carry out heat treatment | 54 | Unit of competency |
| M0282 | MEM6.5AA | Drop and upset forging | 36 | Unit of competency |
| M0279 | MEM6.2AA | Hammer forging | 36 | Unit of competency |
| M0278 | MEM6.1AA | Hand forging | 36 | Unit of competency |
| M0284 | MEM6.7AA | Perform basic incidental heat/quenching, tempering and annealing | 18 | Unit of competency |
| M0281 | MEM6.4AA | Select heat treatment processes and test finished product | 54 | Unit of competency |
| M0283 | MEM6.6AA | Spring repair | 36 | Unit of competency |
| W0824 | MEM6.6AB | Spring repair | 36 | Unit of competency |
7. ELECTIVE
MACHINE & PROCESS OPERATIONS * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM7.16AB, MEM7.18AB, MEM7.19AB, MEM7.20AB, MEM7.22AB, MEM7.23BB, MEM7.30AB, MEM7.31AB Added November 2003.
8. ELECTIVE
SURFACE FINISHING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM8.2AB, MEM8.3AB, MEM8.9AB, MEM8.18AA, MEM8.19AA, MEM8.20AA added November 2003.
9. ELECTIVE
DRAWING, DRAFTING AND DESIGN * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0338 | MEM9.6BA | Advanced engineering detail drafting | 36 | Unit of competency |
| M0339 | MEM9.7BA | Advanced mechanical detail drafting | 36 | Unit of competency |
| M0340 | MEM9.8BA | Advanced structural detail drafting | 36 | Unit of competency |
| M0343 | MEM9.11AA | Apply basic engineering design concepts | 54 | Unit of competency |
| M0337 | MEM9.5AA | Basic Engineering detail drafting | 72 | Unit of competency |
| M1773 | MEM9.9BB | Create 2D drawings using computer aided design system | 72 | Unit of competency |
| M1774 | MEM9.10BB | Create 3D models using computer aided design system | 36 | Unit of competency |
| M0333 | MEM9.1AA | Draw and interpret sketch | 18 | Unit of competency |
| M0336 | MEM9.4BA | Electrical/Electronic detail drafting | 72 | Unit of competency |
| M0334 | MEM9.2AA | Interpret technical drawing | 36 | Unit of competency |
| M0335 | MEM9.3AA | Prepare basic engineering drawing | 72 | Unit of competency |
10. ELECTIVE
INSTALLATION AND COMMISSIONING * Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM10.1AB, MEM10.7AB
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1778 | MEM10.13AA | Assemble and install equipment and accessories/ancillaries | 18 | Unit of competency |
| M0348 | MEM10.5AA | Commission programmable controller programs | 36 | Unit of competency |
| M0344 | MEM10.1AA | Erect structures | 36 | Unit of competency |
| W0839 | MEM10.1AB | Erect structures | 36 | Unit of competency |
| M0353 | MEM10.10AA | Install pipework and pipework assemblies | 36 | Unit of competency |
| M0352 | MEM10.9AA | Install refrigeration and air conditioning plant and equipment | 36 | Unit of competency |
| W0840 | MEM10.7BB | Modification of control systems | 54 | Unit of competency |
| M0345 | MEM10.2AA | Terminate and connect electrical wiring | 27 | Unit of competency |
| M0354 | MEM10.11AA | Terminate and connect specialist cables | 18 | Unit of competency |
11. ELECTIVE
MATERIALS AND HANDLING * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
12. ELECTIVE
MEASUREMENT * Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0378 | MEM12.2AA | Electrical/electronic measurement | 18 | Unit of competency |
| M1779 | MEM12.19AA | Measure components using coordinate measuring machine | 36 | Unit of competency |
| M1781 | MEM12.21AA | Program coordinate measuring machine | 36 | Unit of competency |
| M1782 | MEM12.22AA | Program coordinate measuring machine (advanced) | 18 | Unit of competency |
| M1780 | MEM12.20AA | Set and operate coordinate measuring machine | 18 | Unit of competency |
| M0377 | MEM12.1AA | Use comparison and basic measuring devices | 18 | Unit of competency |
13. ELECTIVE
OCCUPATIONAL HEALTH AND SAFETY* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0390 | MEM13.7AA | Maintain water cooling towers and treatment systems | 18 | Unit of competency |
| M0389 | MEM13.6AA | Monitor Occupational Health & Safety factors for enterprise or section of enterprise | 36 | Unit of competency |
| M0384 | MEM13.1AA | Perform emergency first aid | 9 | Unit of competency |
| M0385 | MEM13.2AA | Undertake Occupational Health & Safety activities in the workplace | 27 | Unit of competency |
| M0386 | MEM13.3AA | Work safely with industrial chemicals and materials | 18 | Unit of competency |
| M1483 | MEM13.13AA | Work safely with ionizing radiation | 36 | Unit of competency |
| M0387 | MEM13.4AA | Work safely with molten metals/glass | 18 | Unit of competency |
14. ELECTIVE
QUALITY * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM15.19BA, MEM15.20BB, MEM15.21BB added November 2003
15. ELECTIVE
COMMUNICATION * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1792 | MEM16.2AB | Participate in formal interviews and negotiations | 36 | Unit of competency |
| M0405 | MEM16.2AA | Participate in formal interviews and/or negotiations | 36 | Unit of competency |
| M0407 | MEM16.4AA | Perform internal/external customer service | 18 | Unit of competency |
16. ELECTIVE
TRAINING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0408 | MEM17.1AA | Assist in development and deliver training in the workplace | 18 | Unit of competency |
| M0409 | MEM17.2AA | Conduct workplace assessment | 18 | Unit of competency |
17. ELECTIVE
MAINTENANCE & DIAGNOSTICS * Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superceeding earlier lower alpha versions. MEM18.28AB, MEM18.58AB added November 2003
18.
NON-DESTRUCTIVE TESTING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1496 | MEM24.12AA | Apply metallurgy principles | 36 | Unit of competency |
| M1495 | MEM24.11BA | Establish non-destructive tests | 108 | Unit of competency |
| M1490 | MEM24.5AA | Perform basic eddy current testing | 18 | Unit of competency |
| M1489 | MEM24.3AA | Perform basic magnetic particle testing | 18 | Unit of competency |
| M1487 | MEM24.1AA | Perform basic penetrant testing | 18 | Unit of competency |
| M1493 | MEM24.9AA | Perform basic radiographic testing | 18 | Unit of competency |
| M1719 | MEM24.6AA | Perform eddy current testing | 54 | Unit of competency |
| M1718 | MEM24.4AA | Perform magnetic particle testing | 36 | Unit of competency |
| M1488 | MEM24.2AA | Perform penetrant testing | 36 | Unit of competency |
| M1494 | MEM24.10AA | Perform radiographic testing | 54 | Unit of competency |
| M1492 | MEM24.8AA | Perform ultrasonic testing | 54 | Unit of competency |
| M1491 | MEM24.7AA | Perform ultrasonic thickness testing | 18 | Unit of competency |
19. ELECTIVE
The WADTE and approved RTOs will be participating in a pilot program in 2001 for entry level training articulating into traineeships and apprenticeship. The RTO must be specifically approved by the WADTE and the Metals Consortium (WA) to access the funding for the pilot program listed below. This is not for general enrolment or VET in Schools. The pilot will be monitored to ensure the outcome is achieved. The overall pilot Qualification hours will be 908 which includes 72 hours of Stream 2000 funding. The Pilot will have two phases. * Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions.
NOTE: NO MORE ENROLMENTS AFTER 31/12/2001.
Phase 1 will incorporate the following:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0202 | MEM1.2FA | Apply principles of Occupational Health & Safety in work environment | 1 | Unit of competency |
| M0203 | MEM1.3FA | Apply quality procedures | 1 | Unit of competency |
| M0204 | MEM1.4FA | Plan to undertake a routine task | 1 | Unit of competency |
| M1174 | Supervised Simulated Workshop Experience M&e Stream 2000 | 72 | Module | |
| M0201 | MEM1.1FA | Undertake interactive workplace communication | 1 | Unit of competency |
| M1356 | MEM18.1AB | Use hand tools | 18 | Unit of competency |
20. ELECTIVES
*CORE BAND 1* ELECTIVES To meet the requirements of the Training Package qualification, complete all Foundation (listed as Core Requirements). Applied Vocational Skills hours available through M1174 Supervised Simulated Wksp Exp M&E Stream 2000 and is in addition to the Training Package award requirements. PLUS Select 16 points in units drawn from Core Band 1 OR Specialisation Band A electives listed below. Additionally Family of Trades points are to be selected in the specialisation. (Total qualification points to equal 16 points for the Certificate I ). The selection of the specialisation will direct the learner into a maximum of 72 hours of competencies plus structured workplace training (See note below).* Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions. MEM5.21AA has been deleted from the competency standards November 2001.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1350 | MEM5.7AB | Manual heating and thermal cutting | 18 | Unit of competency |
| M0209 | MEM2.5C11A | Measure with graduated devices | 18 | Unit of competency |
| M0212 | MEM2.8C10A | Perform computations | 18 | Unit of competency |
| M0211 | MEM2.7C10A | Perform computations - basic | 18 | Unit of competency |
| M0213 | MEM2.9C10A | Perform computer operations | 18 | Unit of competency |
| M1755 | MEM5.12AB | Perform routine manual metal arc welding | 18 | Unit of competency |
| M1754 | MEM5.4AB | Perform routine oxy acetylene welding | 18 | Unit of competency |
| M0249 | MEM5.4AA | Perform routine oxyacetylene welding (fuel gas welding) | 18 | Unit of competency |
| M1163 | Supervised Simulated Wksp Exp (Mem2.5c10a) | 18 | Module | |
| M1166 | Supervised Simulated Workshop Experience (M&e Project) | 108 | Module | |
| M1164 | Supervised Simulated Workshop Experience (Mem2.7c10a) | 36 | Module | |
| M1165 | Supervised Simulated Workshop Experience (Mem2.8c10a) | 36 | Module | |
| M1167 | Supervised Simulated Workshop Experience (Mem2.9c10a) | 72 | Module |
21. ELECTIVE
Phase 2 Specialisation Band A - plus core (24 points)
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0333 | MEM9.1AA | Draw and interpret sketch | 18 | Unit of competency |
| M0334 | MEM9.2AA | Interpret technical drawing | 36 | Unit of competency |
| M0410 | MEM18.1AA | Use hand tools | 18 | Unit of competency |
| M0411 | MEM18.2AA | Use power tools/hand held operations | 18 | Unit of competency |
22. ELECTIVE
Fabrication A maximum of 72 hours in the specialisation. MEM5.21AA has been deleted from the competency standards.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0250 | MEM5.5AA | Carry out mechanical cutting | 18 | Unit of competency |
| M0252 | MEM5.7AA | Manual heating, thermal cutting and gouging | 18 | Unit of competency |
| M0257 | MEM5.12AA | Perform routine manual arc and/or gas metal arc welding | 36 | Unit of competency |
| M0266 | MEM5.21AA | Weld using oxyacetylene welding process (fuel gas welding) | 36 | Unit of competency |
23. ELECTIVE
Machine and Process Operations A maximum of 72 hours in the specialisation.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0289 | MEM7.5AA | Perform general machining | 72 | Unit of competency |
24. ELECTIVE
Measurement/Fabrication A maximum of 72 hours in the specialisation.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0378 | MEM12.2AA | Electrical/electronic measurement | 18 | Unit of competency |
| M0246 | MEM5.1AA | Manual soldering/desoldering - electrical/electronic components | 36 | Unit of competency |
| M0377 | MEM12.1AA | Use comparison and basic measuring devices | 18 | Unit of competency |
25. ELECTIVE
Maintenance and Diagnostics A maximum of 72 hours in the specialisation.* Units updated. NEW STUDENTS enrolling in or after 2002 must select B competencies or higher where superceeding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0414 | MEM18.5AA | Bearings - fault diagnosis installation and removal | 36 | Unit of competency |
| M0462 | MEM18.55AA | Dismantle, replace and assemble engineering components | 27 | Unit of competency |
| M0415 | MEM18.6AA | Dismantle/repair/replace/assemble and fit engineering components | 54 | Unit of competency |
| M0434 | MEM18.25AA | Service combustion engines | 18 | Unit of competency |
| M1358 | MEM18.11AB | Shut down and isolate machines/equipment | 18 | Unit of competency |
| M0420 | MEM18.11AA | Shut down/isolate machines/equipment | 18 | Unit of competency |
26. ELECTIVE
Simulated and Structured Workplace Training
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1173 | Structured Workplace Training Co-ordination | 130 | Module | |
| M1170 | Supervised Simulated Workshop Experience (Mem18.1a) | 36 | Module | |
| M1171 | Supervised Simulated Workshop Experience (Mem18.2a) | 36 | Module | |
| M1168 | Supervised Simulated Workshop Experience (Mem9.1a) | 18 | Module | |
| M1169 | Supervised Simulated Workshop Experience (Mem9.2a) | 18 | Module | |
| M1172 | Supervised Simulated Workshop Experience (Trade Specialisation) | 144 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W231 | MEM10105 | Certificate I in Engineering | Qualification |
| 3262 | 51717 | Certificate I in Metals and Engineering Studies (Pre-apprentice/School Apprentice Link) | Accredited course |
| 1056 | 51718 | Certificate I in Vehicle Body Building (Pre-Apprenticeship) | Accredited course |
VET Info Notes
A structured Training Program Outline (TPO) and log book will need to be completed as part of the Structured
Workplace Training.
GENERAL NOTES
This training program is a representation of the qualification MEM10198 taken
from the Metals and Engineering Training Package MEM98 which should be
consulted for full descriptions of requirements. MEM98 is accredited until
23/10/2001.
1. This qualification is the copyright of The Australian National Training
Authority.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Midland College of
TAFE and modified on the 22/12/2000. This document has been modified on the 31/10/02.
4. WS70 was created as a pathway to identify the School Apprenticeship Link program on the 05/01/2005 by VET Teaching & Learning. This has been replaced by WT08 as of 01/01/2006.
5. WS90 SAL -Phase 2 is for continuing students who enrolled in Phase 1 (WS70) in 2005. It has been added to STARS on 25/11/2005.
Entry Requirements
No information
Traineeships and Apprenticeships