Unit of competency Outline

Date retreived
23/07/2026 6:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a mobile chipper/mulcher

Operate a mobile chipper/mulcher

Unit of competency
National Code
FWPHAR2206
State Code
AXK40
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
30
Description
This unit of competency describes the outcomes required to operate a mobile chipping or mulching unit to chip or mulch timber refuse such as branches and other timber waste left after felling operations. Work is completed in a forest or forest farm setting.The unit applies to those who operate a mobile chipping or mulching unit in a forest environment.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for mobile chipping or mulching.
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective and other equipment and check for operational effectiveness.
  • 1.3 Identify type and quantity of timber refuse to be chipped or mulched.
  • 1.4 Plan chipping or mulching activities in line with work order.
2. Chip or mulch timber refuse
  • 2.1 Reject timber refuse assessed as unsuitable for chipping or mulching and dispose of or recycle in line with environmental protection practices.
  • 2.2 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection requirements.
  • 2.3 Position, secure and set up chipping and mulching unit in line with manufacturer's specifications and required size.
  • 2.4 Direct timber refuse into chipper or mulcher at rate applicable to machine capacity.
  • 2.5 Chip timber refuse to chip sizes specified in work order.
  • 2.6 Respond to critical situations requiring emergency shutdown to prevent personal injury or damage to machine or product.
3. Complete operator maintenance.
  • 3.1 Follow organisational safety procedures to lock out equipment.
  • 3.2 Check cutters for wear and damage at appropriate or recommended intervals.
  • 3.3 Remove, replace and dispose of cutters in line with manufacturer’s recommendations, s ite procedures and environmental protection practices.
  • 3.4 Complete operator maintenance tasks in line with manufacturer’s recommendations and site procedures.
  • 3.5 Record and report production outcomes and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6027 FPIHAR2206B Operate a mobile chipper/mulcher Unit of competency
Replaced By
State Code National Code Title Type
OCR48 FWPHAR2208 Operate a mobile chipper/mulcher Unit of competency