Qualification Outline

Date retreived
22/07/2026 3:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Waste Management

Certificate III in Waste Management

Qualification
National Code:
CPP30719
State Code:
BFB5
TGA Status:
Current
DTWD Status:
Approved
National Endorsed, State Implementation and Classification
Field of Education
0399 - Other Engineering And Related Technologies
Original TGA Release Date
14/02/2020
Approved Date
19/04/2022
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
305
Duration
1 Semester
Current Release Number
4.00
Current Release Date
19/12/2022
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
4.00 19/12/2022 Current Approved
3.00 27/01/2022 Replaced Approved
2.00 07/01/2021 Replaced Approved
1.00 14/02/2020 Replaced Approved
Description

This qualification is for those engaged in waste management who undertake waste collection and processing across a range of government and private sectors involved in municipal, solid, commercial, industrial, construction and demolition waste management.
Job roles and titles vary across the waste management industry and fall within two key areas of activity:
collection: waste collection and transfer
processing: waste treatment, disposal, remediation and resource recovery.
Individuals with this qualification perform tasks in varied contexts, which involve known routines, methods and procedures, and judgement in recognising waste types and managing hazards.
Licensing, legislative, regulatory or certification requirements apply to the operation of vehicles, plant and equipment used in waste management in some jurisdictions and should be confirmed prior to commencing this qualification. For further information, check with the relevant regulatory authority.

Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in twelve (12) units of competency consisting of:
- four (4) core units
- eight (8) elective units.

Electives are to be selected as follows:
- a minimum of two (2) units must be selected from Group A
- up to six (6) units not already selected may be selected from Group A, Group B or Group C
- up to two (2) units may be selected from Group D or any current training package as long as they contribute to a valid, industry-supported vocational outcome, maintain the integrity of the AQF level of this qualification and do not duplicate the outcome of another unit used to achieve this qualification.
1. Core Units

All four (4) units must be completed.

State Code National Code Title Hours Type
OBO59 CPPWMT3002 Conduct waste resource recovery 35 Unit of competency
AVJ48 TLIF1001 Follow work health and safety procedures 20 Unit of competency
OBO56 CPPWMT3003 Identify and respond to hazards and emergencies in waste management 30 Unit of competency
OBO60 CPPWMT3001 Identify and segregate waste 25 Unit of competency
2. Group A Elective Units: Waste Operations

At least two (2) units must be selected.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBO67 CPPWMT3004 Comply with environmental protection requirements when transporting waste 20 Unit of competency
AXI44 CPPWMT3011 Conduct waste assessments 25 Unit of competency
AXF18 CPPWMT3005 Maintain storage area for waste management equipment and consumables 20 Unit of competency
OBO65 CPPWMT3010 Maintain waste landfill sites 40 Unit of competency
OBO66 CPPWMT3009 Place, compact and cover waste at landfill sites 35 Unit of competency
OBO61 CPPWMT3007 Process waste using plant 65 Unit of competency
OBO57 CPPWMT3006 Receive, transfer and dispatch waste 50 Unit of competency
AVJ76 TLID1001 Shift materials safely using manual handling methods 20 Unit of competency
OBO63 CPPWMT3008 Store and monitor contained waste 50 Unit of competency
3. Group B Elective Units: Waste Collection

Up to six (6) units may be selected.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWM80 TLIC4006 Drive multi-combination vehicle 40 Unit of competency
OAB53 TLID0001 Load and unload vehicles carrying special loads 20 Unit of competency
AWM89 TLIC3083 Operate a front lift mobile compaction/collection vehicle 25 Unit of competency
AWM86 TLIC3084 Operate a lift on/lift off collection vehicle 25 Unit of competency
AWM85 TLIC3085 Operate a liquid waste collection vehicle 25 Unit of competency
AWM84 TLIC3087 Operate a rear loading mobile compaction/collection vehicle 25 Unit of competency
AWM81 TLIC3088 Operate a roll on/roll off collection vehicle 25 Unit of competency
AWM82 TLIC3089 Operate a side loading mobile compaction/collection vehicle 25 Unit of competency
OBH87 UETTDREL14 Working safely near live electrical apparatus as a non-electrical worker 36 Unit of competency
4. Group C Elective Units: Waste Processing

Up to six (6) units may be selected.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWM68 TLID2022 Conduct weighbridge operations 20 Unit of competency
BAM29 AHCCOM302 Dispatch materials and composted product 30 Unit of competency
AXK40 FWPHAR2206 Operate a mobile chipper/mulcher 30 Unit of competency
BAP87 AHCCOM301 Operate compost processing plant, machinery and equipment 70 Unit of competency
BAR02 AHCPHT307 Prepare raw materials and compost feedstock 50 Unit of competency
BAT98 AHCPHT308 Prepare value added compost-based products 50 Unit of competency
5. Group D Elective Units: General

Up to two (2) units may be selected.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AVJ26 TLIF3091 Apply awareness of dangerous goods and hazardous materials requirements 15 Unit of competency
OBB13 BSBWHS307 Apply knowledge of WHS laws in the workplace 30 Unit of competency
OBO64 CPPWMT4010 Assess and advise on waste avoidance options 60 Unit of competency
OBO67 CPPWMT3004 Comply with environmental protection requirements when transporting waste 20 Unit of competency
AUI54 BSBFLM312 Contribute to team effectiveness 30 Unit of competency
OCF16 BSBOPS304 Deliver and monitor a service to customers 50 Unit of competency
BAN92 AHCSAW302 Implement erosion and sediment control measures 50 Unit of competency
OCF94 BSBLDR414 Lead team effectiveness 45 Unit of competency
OCG19 BSBINS302 Organise workplace information 20 Unit of competency
AVH55 TLIU2012 Participate in environmentally sustainable work practices 20 Unit of competency
OCD30 HLTAID011 Provide First Aid 18 Unit of competency
AUH95 BSBCUE304 Provide sales solutions to customers 40 Unit of competency
OBO58 CPPWMT4008 Provide waste management information to stakeholders 20 Unit of competency
AUM18 BSBPRO301 Recommend products and services 20 Unit of competency
AVE17 CPPCMN3004 Respond to enquiries and complaints 20 Unit of competency
ODP93 TLID0021 Store and handle dangerous goods and hazardous substances 20 Unit of competency
AVI99 TLIG2007 Work in a socially diverse environment 20 Unit of competency
Replaces
State Code National Code Title Type
D764 CPP30711 Certificate III in Waste Management Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
(TR02020) WASTE MANAGEMENT (LEVEL 3) Traineeship

Part-time is defined as a minimum of 20 hours per week.