Qualification Outline

Date retreived
22/07/2026 6:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diploma of Computer Systems Engineering

Diploma of Computer Systems Engineering

Qualification
National Code:
UEE50111
State Code:
A155
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
06/07/2012
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
1440
Duration
4 Semesters
Current Release Number
4.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
4.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to develop, select, install, commission and maintain computer equipment and systems.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Seven (7) core units and
- A combination of elective units to achieve a total weighting of 1460 points:
- A maximum of 270 weighting points may be chosen from Group A Imported and Common Elective Units
- A maximum of 880 weighting points may be chosen from Group B Elective Units
- A maximum of 580 weighting points may be chosen from Group C Elective Units
- A minimum of 580 to a maximum of 1040 weighting points to be chosen from Group D Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan
1. Core Units

All seven (7) units must be completed

State Code National Code Title Hours Type
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
WC407 UEENEED144A Commission industrial computer systems 18 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
WC714 UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures 18 Unit of competency
WC423 UEENEEE117A Implement and monitor energy sector OHS policies and procedures 18 Unit of competency
WC408 UEENEED145A Modify-redesign of industrial computer systems 18 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of 270 weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
D3471 ICTTEN4212A Apply advanced routing protocols to network design 70 Unit of competency
D0760 BSBINN502A Build and sustain an innovative work environment 50 Unit of competency
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
D3472 ICTTEN4213A Configure and troubleshoot advanced network switching 80 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
D3470 ICTTEN4211A Design, install and configure an internetwork 85 Unit of competency
WB921 BSBWOR502B Ensure team effectiveness 50 Unit of competency
D4868 BSBMGT516C Facilitate continuous improvement 50 Unit of competency
D3469 ICTTEN4210A Implement and troubleshoot enterprise routers and switches 85 Unit of competency
D3473 ICTTEN4214A Install and maintain a wide area network 70 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
D0755 BSBINM501A Manage an information or knowledge management system 40 Unit of competency
D0846 BSBMGT502B Manage people performance 50 Unit of competency
W7822 UEENEEE020B Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
W7733 UEENEEC003B Provide quotations for installation or service jobs 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
3. Group B Elective Units

Units may be chosen to a maximum of 880 weighting points from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC576 UEENEEH150A Assemble and set up basic security systems 72 Unit of competency
WC374 UEENEEA101A Assemble electronic components 36 Unit of competency
WC632 UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
WC386 UEENEED102A Assemble, set-up and test computing devices 72 Unit of competency
WC545 UEENEEH115A Develop software solutions for microcontroller based systems 54 Unit of competency
WC404 UEENEED129A Develop web pages for engineering applications 36 Unit of competency
WC578 UEENEEH152A Enter instructions and test wired and wireless security systems 36 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC452 UEENEEE179A Identify and select components, accessories and materials for energy sector work activities 18 Unit of competency
WC406 UEENEED143A Install and configure a client computer operating system and software 36 Unit of competency
WC465 UEENEEF109A Install and connect data and voice communication equipment 36 Unit of competency
WC458 UEENEEF102A Install and maintain cabling for multiple access to telecommunication services 108 Unit of competency
WC461 UEENEEF105A Install and modify optical fibre performance data communication cabling 36 Unit of competency
WC460 UEENEEF104A Install and modify performance data communication copper cabling 36 Unit of competency
WC577 UEENEEH151A Install large security systems 90 Unit of competency
WC420 UEENEEE108A Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits 36 Unit of competency
WC377 UEENEEA104A Modify electronic sub assemblies 36 Unit of competency
WC533 UEENEEH103A Repair routine business equipment faults 108 Unit of competency
WC532 UEENEEH102A Repairs basic electronic apparatus faults by replacement of components 36 Unit of competency
WC466 UEENEEF110A Select and arrange data and voice equipment for local area networks 36 Unit of competency
WC464 UEENEEF108A Select and arrange equipment for wireless communication networks 36 Unit of competency
WC375 UEENEEA102A Select electronic components for assembly 18 Unit of competency
WC405 UEENEED130A Select, install, configure and test multimedia components 36 Unit of competency
WC409 UEENEED146A Set up and configure basic local area network (LAN) 36 Unit of competency
WC463 UEENEEF107A Set up and configure the wireless capabilities of communications and data storage devices 36 Unit of competency
WC416 UEENEED153A Set up, configure and test biometric devices 36 Unit of competency
WC428 UEENEEE123A Solve basic problems electronic and digital equipment and circuits 72 Unit of competency
WC595 UEENEEH169A Solve problems in basic electronic circuits 90 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
WC425 UEENEEE119A Solve problems in multiple path extra low voltage (ELV) a.c. circuits 36 Unit of competency
WC391 UEENEED112A Support computer hardware and software for engineering applications 108 Unit of competency
WC543 UEENEEH113A Troubleshoot amplifiers in an electronic apparatus 72 Unit of competency
WC567 UEENEEH139A Troubleshoot basic amplifier circuits 36 Unit of competency
WC542 UEENEEH112A Troubleshoot digital sub-systems 72 Unit of competency
WC592 UEENEEH166A Troubleshoot microcontroller based hardware systems 36 Unit of competency
WC544 UEENEEH114A Troubleshoot resonance circuits in an electronic apparatus 72 Unit of competency
WC541 UEENEEH111A Troubleshoot single phase input d.c. power supplies 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
WC618 UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals 36 Unit of competency
WC379 UEENEEA106A Use lead-free soldering techniques 36 Unit of competency
4. Group C Elective Units

Units may be chosen to a maximum of 580 weighting points from Group C.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC417 UEENEED154A Analyse and implement biometric measuring techniques and applications 108 Unit of competency
WC429 UEENEEE124A Compile and produce an energy sector detailed report 54 Unit of competency
WC673 UEENEEI157A Configure and maintain industrial control system networks 54 Unit of competency
WC421 UEENEEE110A Develop and implement energy sector maintenance programs 54 Unit of competency
WC395 UEENEED116A Develop computer network services 108 Unit of competency
WC671 UEENEEI155A Develop structured programs to control external devices 36 Unit of competency
W7735 UEENEEC005B Estimate electrotechnology projects 36 Unit of competency
WC387 UEENEED103A Evaluate and modify object oriented code programs 36 Unit of competency
WC392 UEENEED113A Install and administer Unix based networked computers 72 Unit of competency
WC396 UEENEED117A Install and configure network systems for internetworking 108 Unit of competency
WC403 UEENEED124A Integrate multiple computer operating systems on a client server local area network 72 Unit of competency
W7734 UEENEEC004B Prepare specifications for the supply of materials and equipment for electrotechnology projects 36 Unit of competency
WC389 UEENEED110A Set up, create and implement content for a web server 108 Unit of competency
WC422 UEENEEE114A Supervise and coordinate energy sector work activities 36 Unit of competency
5. Group D Elective Units

A minimum of 580 to a maximum of 1040 weighting points to be chosen from Group D.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC394 UEENEED115A Administer computer networks 72 Unit of competency
WC608 UEENEEH183A Analyse the performance of wireless-based electronic - communication systems 36 Unit of competency
WC669 UEENEEI153A Design and configure Human-Machine Interface (HMI) networks 54 Unit of competency
WC574 UEENEEH148A Design and develop advanced digital systems 36 Unit of competency
WC397 UEENEED118A Design and implement network systems for internetworking 108 Unit of competency
WC606 UEENEEH181A Design electronic printed circuit boards 36 Unit of competency
WC672 UEENEEI156A Develop and test code for microcontroller devices 54 Unit of competency
W7817 UEENEEE015B Develop design briefs for electrotechnology projects 36 Unit of competency
WC410 UEENEED147A Develop energy sector directory services 72 Unit of competency
WC571 UEENEEH145A Develop engineering solutions to analogue electronic problems 72 Unit of competency
WC413 UEENEED150A Develop industrial control programs for microcomputer equipped devices 54 Unit of competency
WC390 UEENEED111A Develop, implement and test object oriented code 126 Unit of competency
W7736 UEENEEC006B Prepare tender submissions for electrotechnology projects 54 Unit of competency
S7312 UEENEEE125A Provide engineering solutions for problems in complex multiple path circuits 54 Unit of competency
WC414 UEENEED151A Provide programming solution for computer systems engineering problems 54 Unit of competency
S7313 UEENEEE126A Provide solutions to basic engineering computational problems 54 Unit of competency
W7857 UEENEEE070B Write specifications for computer systems engineering projects 36 Unit of competency
Replaces
State Code National Code Title Type
W860 UEE50110 Diploma of Computer Systems Engineering Qualification
Replaced By
State Code National Code Title Type
BFQ6 UEE50120 Diploma of Computer Systems Engineering Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
(TR08810) COMPUTER SYSTEMS ENGINEER (LEVEL 5) Traineeship

Part-time is defined as a minimum of 20 hours per week.