Qualification Outline

Date retreived
22/07/2026 5:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer

Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer

Qualification
National Code:
AUM20218
State Code:
BEE5
TGA Status:
Current
DTWD Status:
Approved
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
12/12/2018
Approved Date
30/05/2022
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
430
Duration
1 Semester
Current Release Number
3.00
Current Release Date
17/03/2026
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
3.00 17/03/2026 Current Approved
2.00 14/02/2021 Replaced Approved
1.00 12/12/2018 Replaced Approved
Description

This qualification reflects the role of individuals who perform a range of tasks in the manufacturing sector. The range of technical skills and knowledge is limited. The qualification is suitable for entry into the automotive manufacturing industry.

Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
- Fourteen (14) units of competency:
- Five (5) core units, plus
- Nine (9) elective units.

Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome, without duplicating the outcome of another unit chosen for this qualification.

The electives are to be chosen as follows:
- up to nine (9) elective units may be chosen from the elective units listed below
- up to three (3) elective units may be chosen from a Certificate II or above qualification in this Training Package or another endorsed Training Package or accredited course
Pathways
State Code Title
AB70 Vehicle Body Building Pre-apprenticeship
1. Core Units

All five (5) units must be completed.

State Code National Code Title Hours Type
OAL49 AUMASA011 Apply safe work practices in the automotive manufacturing environment 36 Unit of competency
WH956 AUMGTM001 Assemble vehicle components 20 Unit of competency
WH910 AUMATK002 Prepare and operate tools, equipment and machinery 28 Unit of competency
OAL52 AUMGTA011 Read and interpret work orders and working drawings 36 Unit of competency
WH892 AUMAMA002 Work effectively in teams 12 Unit of competency
2. Elective Units

Up to nine (9) electives may be chosen from the elective units listed below.
Please refer to the packaging rules to the full details of available options.

State Code National Code Title Hours Type
OEQ26 MSS402042 Apply 5S procedures 35 Unit of competency
OEQ34 MSS402003 Apply competitive systems and practices 40 Unit of competency
WH933 AUMFQM001 Apply continuous improvement in automotive manufacturing 64 Unit of competency
OEQ55 MSS402055 Apply quality standards 30 Unit of competency
WH974 AUMGTT001 Apply trim to vehicle components 12 Unit of competency
WH950 AUMGQA001 Apply workplace technical quality standards 24 Unit of competency
WH957 AUMGTM002 Assemble vehicle frames and axles 26 Unit of competency
WH891 AUMAMA001 Contribute to production goals 12 Unit of competency
WH973 AUMGTS004 Fabricate parts for vehicle sub-assemblies 36 Unit of competency
WH965 AUMGTP001 Finish and paint vehicle body and part surfaces 24 Unit of competency
AXE88 AURAEA002 Follow environmental and sustainability best practice in an automotive workplace 20 Unit of competency
WH959 AUMGTM004 Install and fit out components 36 Unit of competency
WH955 AUMGTG001 Install fixed and moveable glass components on vehicles 28 Unit of competency
OAL47 AUMGTM013 Install or replace mechanical units and assemblies 36 Unit of competency
AWM55 TLID3036 Lift and move load using a mobile crane 40 Unit of competency
OEQ32 MSS402011 Manage the impact of change on own work 40 Unit of competency
OAL53 AUMATK013 Monitor and maintain automotive equipment 36 Unit of competency
WH981 AUMGTY001 Paint vehicle chassis and panels 28 Unit of competency
WH975 AUMGTW001 Perform basic welding, thermal cutting, heating and gouging 36 Unit of competency
WH976 AUMGTW002 Perform mechanical cutting 28 Unit of competency
WH929 AUMFBM001 Prepare and process automotive materials and components 64 Unit of competency
WH970 AUMGTS001 Prepare materials for fabrication using jigs and fixtures 40 Unit of competency
WH947 AUMGCA001 Provide customer service 16 Unit of competency
AXD97 AURETR006 Solder electrical wiring and circuits 20 Unit of competency
OEQ33 MSS402004 Sustain process improvements 40 Unit of competency
WH969 AUMGTR003 Test, modify and repair vehicle electrical circuits and systems 24 Unit of competency
OEQ22 MSS402084 Undertake root cause analysis 30 Unit of competency
AXE86 AURAFA001 Use numbers in an automotive workplace 20 Unit of competency
Replaces
State Code National Code Title Type
J828 AUM20213 Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer Qualification
No information
Entry Requirements

This qualification has no entry requirements.

Traineeships and Apprenticeships
No information